Concrete Sludge Underground and Asphalt Equipments
CONVEYOR BELTS
CONVEYOR BELT 1200
The compact size of the the 1200 conveyor makes it ideal for use in work yards where particular problems of space and manoeuvrability apply. The conveyor extends to a maximum length of 12.4 metres, including the swing-out support, and it has a delivery rate in the horizontal position of 45 m3/h. The range of operation with the swing-out support covers a circular area of 290°. The rubber belt runs on metal guides lined with polythene sliding pads, which provide a better sliding surface, avoiding shifting or friction problems that could hinder the movement of the belt, and in particular the segregation of the concrete during transportation. The maximum discharge height, depending on the consistency of the material to discharge (concrete or other), is about 7 metres.
CONVEYOR BELT 1500
The 1500 belt conveyor is provided with a 2.5 m telescopic extension which makes it possible to reach a maximum length of 14.8 meters. The advantage of this type of conveyor lies in the possibility of casting the concrete along the whole area covered by the 2.5- meter telescopic extension without moving the mixer. The final take-up of the additional length makes it possible to carry it with extreme ease and compactness. In the horizontal position, the conveyor has a delivery rate of 45 m3/h in a working radius of 282°. The belt runs on steel guides covered with a polythene lining that provides greater adhesion and a smoother movement of the belt itself, while avoiding the segregation of the concrete during transportation. The speed of the conveyor, independent of the mixer's motor or of the auxiliary motor, ranges from 0 to 3 m/sec
CONVEYOR 1600
The 1600 telescopic conveyor is the largest of the whole range and is capable of reaching a maximum extension of 16 metres. The telescopic extension is an element 4 m long. The functional advantage of the LT 1600 belt conveyor lies in the possibility of casting the concrete over a greater area, corresponding to the 4-m extension, without moving the mixer. The conveyor can be used to discharge up to a height of 8 metres, after previously checking the slump of the concrete. (a capo) In the transportation phase, the LT 1600 is compact and flexible like a traditional conveyor, thanks to a rapid take-up of the telescopic extension element. (a capo) The conveyor has a delivery rate in the horizontal position of 45 m3/h in a working radius of 280°C. The belt runs on a sufficient number of rollers whose movement avoids accumulations of concrete as the belt is running. The belt has a width of 400 mm and runs at speeds ranging from 0 to 3 m/sec
